Ricoh D117 - Paper Jam Rotation Setting; Standby Rotation Setting

Main SP Tables-1
D117/D118 3-20 SM Appendix
010
Overshoot Prevent
Temp.:End
*ENG [0 to 250 / 178 / 1deg/step]
011
Temp.:After Job:Press
Center:B6
*ENG [0 to 250 / 150 / 1deg/step]
021 Temp.:After Main Switch On *ENG [0 to 10000 / 60 / 1msec/step]
101 Heat Off Time:Start:Warm Up *ENG [0 to 10000 / 2000 / 1msec/step]
102
Heat Off Time:Start:Print
Ready
*ENG [0 to 10000 / 500 / 1msec/step]
111
Heat Off Time:Stop:After
Reload/Print Ready
*ENG [0 to 10000 / 0 / 1msec/step]
112 Heat Off Time:Stop:After Job *ENG [0 to 10000 / 0 / 1msec/step]
113
Heat Off Time:Stop:After
Job:BW2
*ENG [0 to 10000 / 0 / 1msec/step]
114 Temp.: Center *ENG [0 to 200 / 160 / 1deg/step]
115
Heat Off Time:Stop:Warm
UP:BW2
*ENG [0 to 10000 / 3300 / 1msec/step]
1122
[Standby Rotation Setting]
Sets the interval between fusing roller idle rotations during standby.
001 Rotation Interval *ENG [0 to 240 / 60 / 1min/step]
002 Rotation Time *ENG [0 to 10000 / 5 / 1msec/step]
1123
[Paper Jam Rotation Setting]
-
001 Normal Rotation Distance *ENG [1 to 10000 / 1 / 1mm/step]
002 Reverse Rotation Distance *ENG [1 to 10000 / 70 / 1mm/step]