Ricoh D117 - Copy Nvversion; Mode Set; Rk4

Main SP Tables-5
SM Appendix 3-297 D117/D118
Appendix:
SP Mode
Tables
5186
[RK4]
Enables or disables the prevention for RK4 (accounting device) disconnection.
If the RK4 is disconnected for 10 seconds when this SP is set to "1 (Enable)",
the machine automatically jams a sheet of paper.
001
RK4 *ENG
[0 or 1 / 0 / 1/step]
0: Disable
1: Enable
5188
[Copy NvVersion]
Displays the version number of the NVRAM on the controller board.
001 Copy MvVersion *CTL [- / - / -]
5191
[Mode Set]
Shifts to the power save mode or not.
001
Power Str Set *CTL
[0 or 1 / 1 / 1/step]
0: OFF, 1: ON
5193
[-]
External controler settings.
001 - CTL
[0 to 10 / 0 / 1/step]
0: External Controller is not installed
1: EFI, 2: Ratio, 3: Egret
4: GJ, 5:Creo, 6: QX-100
7: Kurofune
8~10: Reserved