Ricoh D117 - Toner Remaining: Display; Toner Status: Display; Tonner End Detection: Set

Main SP Tables-3
D117/D118 3-192 SM Appendix
3100 [Tonner End Detection: Set]
001 ON/OFF *ENG
Sets if NE/TE is detected or not.
[0 or 1 / 0 / 1/step]
0:Detect, 1:NotDetect
002 NE Detection *ENG
Sets NE/TE detection mode.
[0 or 1 / 0 / 1/step]
0:ALL, 1:TESensor
3101 [Toner Status: Display]
001 Bk *ENG
Displays the toner remaining status.
[0 to 2 / - / 1/step]
2: -l, 1: -, 0:-
002 C *ENG
003 M *ENG
004 Y *ENG
3102 [Toner Remaining: Display]
001 Bottle Motor: Bk *ENG
Displays the toner remaining amount
calculated with motor driving time.
[0.000 to 500.000 / - / 0.001g/step]
002 Bottle Motor: C *ENG
003 Bottle Motor: M *ENG
004 Bottle Motor: Y *ENG
011 Pixel: Bk *ENG
Displays the toner remaining amount
calculated with image processing
coverage.
[0.000 to 500.000 / - / 0.001g/step]
012 Pixel: C *ENG
013 Pixel: M *ENG
014 Pixel: Y *ENG
021 Fill Amount: Bk *ENG
Displays the toner amount in a new
bottle.
[0 to 500 / - / 1g/step]
022 Fill Amount: C *ENG
023 Fill Amount: M *ENG