Ricoh D117 - Accounting Counter;Paper Display;Toner Refill Detection Display; Main SP Tables-5; MM;Inch Display Selection; SP5-XXX (Mode)

Main SP Tables-5
D117/D118 3-290 SM Appendix
3.5 MAIN SP TABLES-5
3.5.1 SP5-XXX (MODE)
5024
[mm/inch Display Selection]
Display units (mm or inch) for custom paper sizes.
001 0:mm 1:inch *CTL
[0 or 1 / 0 / 1/step]
0: mm (Europe/Asia)
1: inch (USA)
5045
[Accounting Counter]
Selects the counting method.
NOTE: The counting method can be changed only once, regardless of whether
the counter value is negative or positive.
001 Counter Method *CTL
[0 or 1 / 0 / 1/step]
0: Developments
1: Prints
5047 [Paper Display]
001 Backing Paper *CTL
[0 or 1 / 0 / 1/step]
0: OFF, 1:ON
5051
[Toner Refill Detection Display]
Enables or disables the toner refill detection display.
001 Toner Refill Detection Display
*CTL
[0 or 1 / 0 / 1/step] Alphanumeric
0: ON, 1: OFF