Ricoh D117 - Bluetooth; Remote ROM Update; Save Debug Log

Main SP Tables-5
D117/D118 3-376 SM Appendix
003 Total Counter *CTL [0 to 99999999 / 0 / 1/step]
5851 [Bluetooth]
001
Mode *CTL
[0x00 or 0x01 / 0x00 / 1/step ]
0x00:Public
0x01:Private
Sets the operation mode for the Bluetooth Unit. Press either key.
5856
[Remote ROM Update]
Allows the technician to upgrade the firmware using a local port (IEEE1284)
when updating the remote ROM.
002 Local Port *CTL
[0 or 1 / 0 / 1/step]
0: Disable
1: Enable
5857 [Save Debug Log]
001
On/Off (1:ON 0:OFF) *CTL
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
Switches the debug log feature on and off. The debug log cannot be captured
until this feature is switched on.
002
Target (2: HDD 3: SD) *CTL
[2 or 3 / 2 / 1/step]
2: HDD, 3: SD Card
Selects the storage device to save debug logs information when the
conditions set with SP5-858 are satisfied.
005
Save to HDD *CTL [-999999 to 999999 / 0 / 1/step]
Saves the debug log of the input SC number in memory to the HDD.
A unique file name is generated to avoid overwriting existing file names on
the SD Card.
Up to 4MB can be copied to an SD Card. 4 MB segments can be copied one
by one to each SD Card.