SP Mode
Tables
2193
[MUSIC Condition Set]
Line Position Adjustment: Condition Setting
002
Page: Job End: BW+FC *ENG [0 to 999 / 500 / 1page/step]
Adjusts the threshold of the line position adjustment for BW and color printing
mode after job end.
003
Page: Job End: FC *ENG [0 to 999 / 200 / 1page/step]
Adjusts the threshold of the line position adjustment for color printing mode
after job end.
004
Page: Interrupt: BW+FC *ENG [0 to 999 / 200 / 1page/step]
Adjusts the threshold of the line position adjustment for BW and color printing
mode during job.
005
Page: Interrupt: FC *ENG [0 to 999 / 200 / 1page/step]
Adjusts the threshold of the line position adjustment for color printing mode
during jobs.
006
Page: Stand-By: BW *ENG [0 to 999 / 100 / 1page/step]
Adjusts the threshold of the line position adjustment for BW printing mode in
stand-by mode. The line position adjustment is done when the number of
outputs in BW printing mode reaches the value specified with this SP and the
condition of SP2-193-008 or SP2-193-009 is satisfied
007
Page: Stand-By: FC *ENG [0 to 999 / 100 / 1page/step]
Adjusts the threshold of the line position adjustment for BW printing mode in
stand-by mode. The line position adjustment is done when the number of
outputs in color printing mode reaches the value specified with this SP and the
condition of SP2-193-008 or SP2-193-009 is satisfied.
008
Te m p . *ENG [0 to 100 / 5 / 1deg/step]
Adjust the temperature change threshold for the line position adjustment
(Mode b: adjustment once). The timing for line position adjustment depends on
the combinations of several conditions.
To Next Page
Loading...
