Ricoh D117 - Feed Permit Setting

Main SP Tables-1
D117/D118 3-6 SM Appendix
112 Rotation Time:BW2:Hot *ENG [0 to 200 / 0 / 1sec/step]
1102
[Feed Permit Setting]
Specified the settings of the paper feeding timing.
001 Temp.:Lower Delta:Center *ENG [0 to 200 / 40 / 1deg/step]
002 Temp.:Lower Delta:End *ENG -
003 Temp.:Upper Delta:Center *ENG [0 to 200 / 15 / 1deg/step
004 Temp.:Upper Delta:End *ENG -
005 Temp.:Lower Delta:Press *ENG [0 to 200 / 95 / 1deg/step]
006 Rotation Time *ENG [0 to 200 / 0 / 1sec/step]
007
Temp.:Lower
Delta:Center:Sp.1
*ENG [0 to 200 / 40 / 1deg/step]
008
Temp.:Lower
Delta:End:Sp.1
*ENG -
009
Temp.:Upper
Delta:Center:Sp.1
*ENG [0 to 200 / 15 / 1deg/step]
010
Temp.:Upper
Delta:End:Sp.1
*ENG -
011
Temp.:Lower
Delta:Press:Sp.1
*ENG [0 to 200 / 95 / 1deg/step]
012 Rotation Time:Sp.1 *ENG [0 to 200 / 0 / 1sec/step]
013
Temp.:Lower
Delta:Center:Sp.2
*ENG [0 to 200 / 40 / 1deg/step]
014
Temp.:Lower
Delta:End:Sp.2
*ENG -
015
Temp.:Upper
Delta:Center:Sp.2
*ENG [0 to 200 / 15 / 1deg/step]