Ricoh D117 - Cherry Server; Copy Server Set Function; Device Setting

Main SP Tables-5
D117/D118 3-386 SM Appendix
5967 [Copy Server Set Function]
001
(0:ON 1:OFF) *CTL
[0 or 1 / 0 / 1/step]
0: ON, 1: OFF
Enables and disables the document server. This is a security measure that
prevents image data from being left in the temporary area of the HDD. After
changing this setting, you must switch the main switch off and on to enable the
new setting.
5974
[Cherry Server]
Specifies which version of ScanRouter, “Light” or “Full”, is installed.
001
(0:Light 1:Full) *CTL
[0 or 1 / 0 / 1/step]
0:Light 1:Full
5985
[Device Setting]
Enables/disables the on-board device.
001
On Board NIC CTL
[0 to 2 / 0 / 1/step]
0: Disable, 1: Enable,
2: Function limitation
When the "Function limitation" is set, "On board NIC" is limited only for the
NRS or LDAP/NT authentication.
 Other network applications than NRS or LDAP/NT authentication are
not available when this SP is set to "2".Even though you can change
the initial settings of those network applications, the settings do not
work.
002
On Board USB CTL
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable