Ricoh D117 - Ohp:bias; Ohp:bias:bw; Thick3:Edgeenvcorrection; Thick3:Envcorrectiontable; Thick3:Switchtimingtrailedge

Main SP Tables-2
D117/D118 3-140 SM Appendix
2538
[Thick3:SwitchTimingTrailEdge]
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode.
003 Paper Transfer:1side *ENG
[0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2539
[Thick3:EnvCorrectionTable]
Adjusts the environment coefficient for each mode. When the environment is
detected as MM, SP2651 and SP2652 are multiplied by these SP values.
015 Separation DC:1side *ENG
[1 to 100 / 30 / 1/step]
016 Separation DC:2side *ENG
2539 [Thick3:EdgeEnvCorrection]
019 Separation DC:1side *ENG
[1 to 100 / 30 / 1/step]
020 Separation DC:2side *ENG
2541
[OHP:Bias]
Adjusts the DC voltage of the discharge plate for OHP.
003 Separation DC *ENG [0 to 4000 / 0 / 10-V/step]
2543
[OHP:Bias:BW]
Adjusts the current for the paper transfer roller for OHP in black-and-white
mode.
003 PaperTransfer *ENG [0 to 200 / 13 / 1-uA/step]