Ricoh D117 - Optional Counter Interface Unit Type a Installation; Installation Procedure

Optional Counter Interface Unit Type A (B870)
D117/D118 2-48 SM
2.8.2 INSTALLATION PROCEDURE
 Unplug the copier power cord before starting the following procedure.
1. Rear cover (
p.4-22)
2. Controller box cover (
p.4-127)
3. Install the four studs [A] in the controller box.
4. Install the key counter interface board [A] on the four studs.
5. Connect the harness included in this kit to the connector [B] on the interface board.