Ricoh D117 - VM Card Type T

Controller Options
SM 2-99 D117/D118
Installation
2.14.7 VM CARD TYPE T
 Unplug the main machine power cord before you do the following procedure.
1. Remove the SD-card slot cover [A] from the SD card slots (
x 1).
2. Insert the SD card (VM card) in SD slot 1 (upper) with its label face [A] to the rear of the
machine.
3. Attach the SD-card slot cover, and then turn on the machine (
x 2).
4. Make sure that the machine can recognize the option (see "Check All Connections" at the end
of this section).