Ricoh D117 - Page 386

SC Tables
SM 6-25 D117/D118
Troubleshooti
ng
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
524 D
Transport motor error
The machine detects a High signal from a transport motor lock
detection for 2 seconds after the transport motor turned on.
 Unit overload
 Defective motor
1. Replace the unit.
2. Replace the motor.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
525 B
Transport motor error: bank 1
The machine detects a Lock signal from a bank 1 transport motor after
the motor turned on.
526 B
Transport motor error: bank 2
The machine detects a Lock signal from a bank 2 transport motor after
the motor turned on.
 Motor overload
 Defective motor
 Disconnected connectors
 Broken harness
1. Turn off and on the main power switch.
2. Check or connect the connectors.
3. Replace the harness.
4. Replace the motor.