ng
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
6261 6420 6469 7200 00 "bad dir"
[0x696e]
gwinit process ending
0x69742064 "init died”
[0x766d]
VM is full
0x5f706167 "vm_pageout: VM is full”
[554c]
Processing ends at USB loader
UL (USB error)
----
Others
Error in the OS
Others
"init died", "vm_pageout: VM is full", "Cache Error”
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
820
CTL
D
Self-diagnostics error: CPU
[XXXX]: Detailed error code
[0001] to
[06FF]
[0801] to [4005]
CPU error
During the self-diagnostic, the controller CPU detects an error. There
are 47 types of error code (0001 to 4005) depending on the cause of
the error. The CPU detects an error and displays the specific error code
with the program address where the error occurs.
System firmware problem
Defective controller
To Next Page
Loading...
