Supported Paper Sizes
D117/D118 1-8 SM Appendix
Paper Size (W x L)
Main Tray PFU By-pass Tray
Duplex
NA E/A NA E/A NA E/A
Government
LG SEF
8.25” x 14” N N Y Y Y Y Y*
Eng Quatro
SEF
8” x 10” Y# Y# Y# Y# Y Y N
Custom
(Width)
mm 139.5 to 216 139.5 to 216 76.2 to 216 -
inch 5.5” to 8.5” 5.5” to 8.5” 3" to 8.5" -
Custom
(Length)
mm 210 to 297 210 to 356.6 139 to 600 -
inch
8.27” to
11.69”
8.27" to
14.03"
5.48" to
23.62"
-
Com10 Env. 4.13" x 9.5" N N N N Y Y N
Monarch
Env.
3.88" x 7.5" N N N N Y Y N
C6 Env. 114 x 162 mm N N N N Y Y N
C5 Env. 162 x 229 mm N N N N Y Y N
DL Env. 110 x 220 mm N N N N Y Y N
Y: Supported: the sensor detects the paper size.
Y#: Supported: the user specifies the paper size.
N: Not supported
Y*: A paper tray unit is required. (Not available for Main Tray)
The paper sizes can be set with the operation panel in 1 mm steps.
The usable range of paper sizes is as follows:
Width: 76.2 to 216 mm (3” to 8.5”)
Length: 139 to 600 mm (5.48” to 23.62”)
Auto Duplex mode is not available for By-pass tray.
To Next Page
Loading...
