Ricoh D117 - Page 518

Main SP Tables-1
D117/D118 3-16 SM Appendix
036
Delay:Low Speed:FC:2 *ENG [0 to 20000 / 5783 / 1msec/step]
041 to
043
Sets the pressure temperature to calculate the temperature correction value.
Lower limit or Upper limit for temperature correction value.
041
Press Reference Temp.:FC *ENG [0 to 200 / 70 / 1deg/step]
042
Temp. Correction Lower
Limit
*ENG [-30 to 0 / -1 / 1 deg/step]
043
Temp. Correction Upper
Limit
*ENG [0 to 30 / 0 / 1deg/step]
051 to
052
Sets the coefficient to calculate the temperature correction value. Paper Type:
Plain 1, Plain 2, Thick 1, Thick 2 Thick3, Special 1, Special 2, Special 3,
Envelop, or OHP.
051
Paper Thickness
Coeff.:Plain1
*ENG [0 to 100 / 0 / 1/step]
052
Paper Thickness
Coeff.:Plain2
*ENG [0 to 100 / 0 / 1/step]
101 to
103
Sets the pressure temperature (Bk) to calculate temperature correction value.
101
Press Reference Temp.:Bk
Normal
*ENG [0 to 200 / 70 / 1deg/step]
102
Press Reference Temp.:Bk
Lv1
*ENG [0 to 200 / 70 / 1deg/step]
103
Press Reference Temp.:Bk
Lv2
*ENG [0 to 200 / 70 / 1deg/step]