5. Attach the appropriate paper tray number decal [A] and paper size decal [B] above and below
the line [C] on each tray of the paper feed unit.
The paper tray number and size sheet is in the accessory box of the main machine.
6. Load paper into the paper tray(s) and set the side fences and end fence(s).
7. Adjust the registration for each tray (
p.4-3).
For tray 2, use SP1002-003
For tray 3, use SP1002-004
8. Check the paper feed unit operation and copy quality.
To Next Page
Loading...
