Main SP Tables-2
D117/D118 3-174 SM Appendix
2656
[Thick2:SwitchTimingLeadEdge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
003 Paper Transfer:1side *ENG
[0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2657 [Thick2:TrailEdgeCorrection]
003 Paper Transfer:1side *ENG
[0 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
2658
[Thick2:SwitchTimingTrailEdge]
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode.
003 Paper Transfer:1side *ENG
[0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG
007 Separation DC:1side *ENG
008 Separation DC:2side *ENG
To Next Page
