Ricoh D117 - Page 737

Main SP Tables-3
SM Appendix 3-235 D117/D118
Appendix:
SP Mode
Tables
002 Target(Lwr Limit) *ENG
Sets the lower limit of the target range of
developer gamma adjustment for toner
density adjustment process control.
[0.00 to 1.00 / -0.15 /
0.01mg/cm^2/-kV/step]
005
Force Consume
Threshhold
*ENG
Sets the forced consumption threshold for
toner density adjustment process control.
[1.00 to 6.00 / 1.50 /
0.01mg/cm^2/-kV/step]
006 Consume(Upp Limit) *ENG
Sets the consumption pattern for toner
density adjustment process control.
[10 to 2550 / 127 / 10cm^2/step]
007 Consume(Upp Limit) *ENG
Sets the upper limit of number of
consumptions for toner density
adjustment process control.
[0 to 16 / 16 / 1times/step]
008 Force Supply Threshhold *ENG
Sets the forced supply threshold for toner
density adjustment process control.
[0.00 to 1.00 / 0.50 /
0.01mg/cm^2/-kV/step]
009 Supply(Upp Limit) *ENG Sets the upper or lower limit of supply
quantity for toner density adjustment
process control.
[0.1 to 25.5 / 1.0 / 0.1g/step]
010 Supply(Lwr Limit) *ENG
021 Pattern Duty:K *ENG
Sets LD Duty of consumption pattern for
toner density adjustment process control.
[0 to 15 / 15 / 1/step]
022 Pattern Duty:C *ENG
023 Pattern Duty:M *ENG
024 Pattern Duty:Y *ENG
031 Max Counts:PowerON *ENG Sets the upper limit of number of
consumptions for toner density
adjustment process control.
[0 to 50 / 0 / 1/step]
034 Max Counts:Jobend *ENG