Platen Cover (D607)
D117/D118 2-38 SM
4. Secure the stud screw [A].
5. Reinstall the scanner rear cover removed in step 2.
6. Open the platen cover
7. Place the platen sheet [A] on the exposure glass.
8. Line up the rear left corner of the platen sheet flush against corner [B] on the exposure glass.
9. Close the platen cover.
10. Reopen the platen cover.
11. Press the surface of the platen sheet gently to attach it securely on the platen cover.
To Next Page
Loading...
