Main SP Tables-8
SM Appendix 3-485 D117/D118
Appendix:
SP Mode
Tables
8 801 Toner Remain *CTL
[0 to 100/ 0 / 1]
These SPs enable the display of the amount of toner remaining in steps of
10%.
Note: In actuality, the controller is capable of detecting changes in steps of
1%. However, this SP relies on the detection data from the Engine
(system), which is limited to a detection resolution of 10% increments.
8 801-001 K
8 801-002 Y
8 801-003 M
8 801-004 C
8 811 Eco Counter
8 811-001
Eco Total *CTL
[0 to 9999999 / - / 1]
Displays the number of pages reduced by using the color, full color, duplex
and combine function.
8 811-002
Color *CTL
[0 to 9999999 / - / 1]
Displays the number of pages reduced by using the color function.
8 811-003
Full Color *CTL
[0 to 9999999 / - / 1]
Displays the number of pages reduced by using the full color function
8 811-004
Duplex *CTL
[0 to 9999999 / - / 1]
Displays the number of pages reduced by using the duplex function.
8 811-005
Combine *CTL
[0 to 9999999 / - / 1]
Displays the number of pages reduced by using the combine function.
8 811-006
Color(%) *CTL
[0 to 100/ - / 1]
Displays the utilization ratio of the color function.
Rev. 7/11/2014
⇒
To Next Page
Loading...
