Configuring the Scanner Settings
78
3
Note
❒ The inside line of the original table’s guide on the side of the control panel
exactly passes the vertical reference point for the ADF scanning, when the
guide is fully expanded.
❖
❖❖
❖ Image Density
This item lets you select the scan density in one of the seven steps. The larger
the value, the darker the scanned image becomes.
❖
❖❖
❖ Erase Color
This setting is available only when “Black and White:Text”, “Black and
White:Text/Photo”, “Black and White:Photo”, or “Black and White:Gray
Scale” is selected in the [ Scan Type ] list. You can select an erase color from
red, green, or blue, which color is deleted (ignored) when scanning is per-
formed. Select “Off” when you want to disable erase color.
Note
❒ The erase color function may not work as expected depending on the col-
ors on the originals.
❖
❖❖
❖ Noise Reduction
This function is disabled in this machine.
❖
❖❖
❖ Edge Smoothing
This function is disabled in this machine.
❖
❖❖
❖ Filter
This item lets you select whether to use a filter for scanning.
• Off
No filter for scanning.
• MTF
Images are scanned with sharpened borders.
• Fine Noise
Images are scanned with softened borders.
❖
❖❖
❖ Inversion
This item lets you select whether to scan an original with white and black por-
tions inverted, when “Black and White:Text”, “Black and White:Text/Photo”,
“Black and White:Photo”, or “Black and White:Gray Scale” is selected in the
[Scan Type] list.
❖
❖❖
❖ File Type
This item lets you select the format for saving scanned images. The option
you select for this setup item affects the Send File operations, including send-
ing a file as an e-mail attachment, sending a file to a Windows shared folder,
and sending a file to an FTP server.
To Next Page
Loading...
