Ricoh P C301W - Page 141

5.System Maintenance
129
Menu
Description
[-5 to 5 / 0 / 0.1mm/step]
Vert.Tray2
Adjusts the vertical registration for tray 2.
[0 to 5 / 0 / 0.1mm/step]
Horiz Bypass Tray
Adjusts the horizontal registration for the
bypass tray.
[-5 to 5 / 0 / 0.1mm/step]
Vert Bypass Tray
Adjusts the vertical registration for the
bypass tray.
[0 to 5 / 0 / 0.1mm/step]
Horiz.Dup. Back
Adjusts the horizontal registration for the
back side in duplex mode.
[-5 to 5 / 0 / 0.1mm/step]
Vert.Dup. Back
Adjusts the vertical registration for the
back side in duplex mode.
[0 to 5 / 0 / 0.1mm/step]
Destination
Sets the destination and updates the
engine setting.
[DOM / NA (Default) / EU / CHN /
TAIWAN / ASIA]
Model Name
Displays the current model in a dropdown
list.
Do not change this setting (DFU).
2nd Transfer
Media Type
Selects the media type in order to set the
paper transfer current.
“2nd Front” and “2nd Back” are the only
features affected by the settings for the
selected "Media Type".
• Thin Paper
• Plain Paper 1
• Plain Paper 2
• Middle Thick Paper
• Recycled Paper
• Color Paper
• Letterhead
• Preprinted Paper
• Prepunched Paper
• Label Paper
• Bond Paper