• Cardstock
• Envelope
• Thick Paper 1
• Thick Paper 2
Adjusts the transfer roller current (front
side), based on the default value.
[-15 to 15 / 0 / 1µA/step]
Adjusts the transfer roller current (back
side), based on the default value.
[-15 to 15 / 0 / 1µA/step]
Execute this to initialize a new EEPROM.
Turn the machine power off/on after you
execute this setting.
Also, the following items are cleared by
EEPROM initialization:
• Machine total counter (total page,
full color, and BW)
• Error log (listed as “Call Service” on
Maintenance Page)
• Duplex page counter
Resets the image transfer unit life
counter.
Resets the fusing unit life counter.
Resets the paper transfer unit (transfer
roller) life counter.
Displays the current maintenance ID
number.
Do not change this setting (DFU).
[0x00 to 0x7F / - / -]
Sets up the LD driver parameters.
Only valid alphanumeric characters can
be input: 0 to 9, a to f, A to F.
Transfers the above parameters to the
EEPROM on the EGB.
Executes the transfer belt adjustment.