Ricoh P C301W - Page 144

5.System Maintenance
132
Menu
Description
temperature detected error (hardware)
occurred.
Color Registration
Executes the MUSIC.
Special Mode
(DFU)
Init LSU Data
Resets the LD driver parameters written
to the EEPROM on the EGB.
Fuser Unit
Fus. Temp. Dly
Heat Center
Displays the current temperature (°C) at
the fusing thermopile.
Heat NC
Displays the current temperature (°C) at
the fusing NC sensor.
Press Center
Displays the current temperature (°C) at
the pressure roller thermistor (center).
Press Left
Displays the current temperature (°C) at
the pressure roller thermistor (end).
Press Right
(Reserved)
Con. Prt Mod Swi.
Switches continuous print mode.
[0 (Fusing Priority) / 1 (Productivity
Priority) / 2 (Normal Mode)]
Tar. Tp. speed1
Energy Saving
Sets target fusing temperature for Energy
Save Mode.
Thin:FC
Sets the target fusing temperature (°C) of
Line Speed 1 for each paper type and
printing mode.
• Thin
• Plain1
• Plain2
• Middle Thick
• Recycle
Thin:BW
Plain1:FC
Plain1:BW
Plain2:FC
Plain2:BW
MiddleThick:FC
MiddleThick:BW
Recycle:FC
Recycle:BW
Tar. Tp. speed3
Thin:FC
Sets the target fusing temperature (°C) of
Line Speed 3 for each paper type and
printing mode.
• Thin
• Plain1
• Plain2
• Middle Thick
Thin:BW
Plain1:FC
Plain1:BW
Plain2:FC
Plain2:BW
MiddleThick:FC