Ricoh P C301W - Page 163

5.System Maintenance
151
Menu
Description
end: Notice “Replace Now”
• 3: At near end: Notice, At life
end: Notice “Replace Now”
and stopped
Fuser Unit
Fusing Temp.
Display
Heat Center
Displays the current temperature
(°C) at the fusing thermopile.
Heat NC
Displays the current temperature
(°C) at the fusing NC sensor.
Press Center
Displays the current temperature
(°C) at the pressure roller
thermistor (center).
Press Left
Displays the current temperature
(°C) at the pressure roller
thermistor (end).
Press Right
(Reserved)
Continuous Print Mode Switch
Switches continuous print mode.
[0 (Fusing Priority) / 1
(Productivity Priority) / 2 (Normal
Mode)]
Target Temp.speed1
Energy Saving
Sets target fusing temperature for
Energy Save Mode.
Thin:FC
Sets the target fusing temperature
(°C) of Line Speed 1 for each
paper type and printing mode.
• Thin
• Plain1
• Plain2
• Middle Thick
• Recycle
Thin:BW
Plain1:FC
Plain1:BW
Plain2:FC
Plain2:BW
MiddleThick:FC
MiddleThick:BW
Recycle:FC
Recycle:BW
Target Temp.speed3
Thin:FC
Sets the target fusing temperature
(°C) of Line Speed 3 for each
paper type and printing mode.
• Thin
• Plain1
• Plain2
Thin:BW
Plain1:FC
Plain1:BW
Plain2:FC
Plain2:BW