Ricoh P C301W - Page 167

5.System Maintenance
155
Menu
Description
voltage.
Min
Displays min. value of detected
voltage.
Last
Displays the value of most recently
detected voltage.
SC
Displays the detected voltage at
time of SC occurrence.
Threshold Voltage
Displays detected voltage at STOP.
Inrush Control
Sets the Inrush Control mode.
When using with an external power
supply instead of a commercial
power supply, set to "On".
[Off / On]
Flicker Control
Sets the Flicker Control mode.
[Off / On]
I/O Check
INPUT Check
Fusing:New Unit
Detect.
Displays the fusing unit status.
0: New unit, 1: Old unit
Registration Sensor
Displays the registration sensor
status.
0: Paper present, 1: No paper
Paper End Detection
Displays the paper end sensor
status.
0: Paper present, 1: No paper
Exit Sensor
Displays the paper exit sensor
status.
0: Paper present, 1: No paper
Fusing Entrance
Sensor
Displays the fusing entrance
sensor status.
0: Paper present, 1: No paper
ITB Contact Sensor
Displays the ITB contact sensor
status.
0: Spaced, 1: Contact
Toner Collection Full
Sensor
Displays the waste toner overflow
sensor status.
0: Not full, 1: Full
Toner Collection Set
Sensor
Displays the waste bottle set
sensor status.