Roche Diagnostics
Instructions for Use · Version 13.0 155
cobas b 123 POC system 6 Measurement
Configuring measurement input values
4
To add an input value, choose it from the list on the left panel of the screen and
press the button.
5
To remove an input value, choose it from the list on the right panel of the screen
and press the button.
6
To assign an input value as a mandatory input, choose it from the list on the right
panel of the screen and press the Mandatory input button.
An asterisk appears next to the input value on the right panel of the screen.
Mandatory input values have to be entered for each measurement.
In the screen in which they appear, mandatory inputs will have a flashing yellow
background together with an audible warning.
7
To set a default value for an input value, choose it from the list on the right panel
of the screen and press the Set default value button.
This feature is not available for all input values. If it is available for your selected
input value, the screen displays a numeric keyboard or a dialog box.
8
Enter your new default value in the numeric keyboard box or select it in the dialog
box. To apply it, press the OK button.
s
To Next Page
Loading...
Need help?
General
