Roche cobas b 123 User Manual

Roche Diagnostics
158 Instructions for Use · Version 13.0
6 Measurement cobas b 123 POC system
Configuring the parameter selection field
Figure 6-6 Overview tab
s
Creating user-defined parameter groups
Creating user-defined parameter groups makes it easier for you to activate the
measurement parameters you use most on the Overview tab. You can create up to 3
user-defined parameter groups with this feature.
p To create user-defined parameter groups
1 Utilities > Configuration > Measurement > Parameter > Edit panels
Figure 6-7 User-defined parameter group setup screen
2 To select a panel for the user-defined parameter group, press
the and buttons at the top of the Edit panels panel to choose one of the 3
panel buttons.
3 To change the name of the group, press the button. Enter your name using the
keyboard box that appears on the screen. To apply your name change, press the
OK button.

Roche cobas b 123 Specifications

General

Brand	Roche
Model	cobas b 123
Category	Medical Equipment
Language	English