Roche cobas b 123 User Manual

Roche Diagnostics
Instructions for Use · Version 13.0 173
cobas b 123 POC system 6 Measurement
Measurement results and reports
Measurement results and reports
Results tab When one measured value is available, the Results tab automatically appears. You
can continue to enter input values by returning to the Input values tab.
You can assign which measured and calculated values are displayed on the Results
tab during a measurement.
u Configuring the measurement results screen (p. 156)
Figure 6-26 Results tab after a syringe measurement
This is the legend for the symbols shown in the Results tab. These symbols also
appear on measurement reports.
The value is below the physiological range.
The value is above the physiological range.
The value is below the critical range.
The value is above the critical range.
The value exceeds the upper limit of the measuring range.
The value is below the lower limit of the measuring range.
No measured value is available.
(c) Correlation factors have been applied to this measurement result.

Roche cobas b 123 Specifications

General

Brand	Roche
Model	cobas b 123
Category	Medical Equipment
Language	English