Roche Diagnostics
184 Instructions for Use · Version 13.0
7 Quality control cobas b 123 POC system
Performing QC measurements
Performing QC measurements
You can perform the following types of QC measurements:
o AutoQC measurement
o User-activated AutoQC measurement
o Manual QC measurement
NOTICE
Manual QC measurement
r When performing a manual QC measurement, enter or check the QC ranges from the
package insert.
AutoQC measurements AutoQC measurements are performed automatically at predefined times that you can
configure.
Figure 7-2 QC scheduler
q
The results of an AutoQC measurement are not shown on the screen at the end of a
measurement. You can view the results of AutoQC measurements in the QC database.
u QC database (p. 192)
p To perform a user-activated AutoQC measurement
q
User-activated QC measurements are only possible if the instrument is ready for a
measurement.
1
Workplace > QC measurement
The following window appears on the screen:
Figure 7-3 Quality control menu screen
To Next Page
Loading...
