Roche Diagnostics
Instructions for Use · Version 13.0 313
cobas b 123 POC system 12 Troubleshooting
General information
General information
WARNING
Infection and injury due to contact with used components
Contact with used components, such as Fluid Packs, AutoQC Packs, AutoCVC Packs, and
Sensor Cartridges, may lead to biohazardous contamination, resulting in personal injury
and/or infection.
r Treat these components as infectious waste. Dispose consumables according to the
local regulations. For more information, contact your Roche Service representative.
r Wear appropriate personal protective equipment, such as laboratory clothing,
protective gloves, safety glasses, face masks, and safety visors, during disposal to
prevent direct contact.
r Take extra care when working with protective gloves. They can easily be pierced or cut,
leading to infection.
r If any biohazardous material is spilled, wipe it up immediately and apply a disinfectant.
r If waste comes into contact with your skin, wash the affected area immediately with
soap and water and apply a disinfectant. Consult a physician.
The system can monitor air bubbles, clots, leaks and blockages in the system. If your
system detects one of these issues, an error message appears as a system stop, module
stop, or status message.
To Next Page
Loading...
