Roche cobas b 123 User Manual

Roche Diagnostics
Instructions for Use · Version 13.0 247
cobas b 123 POC system 10 Software functions
General software information
General software information
Software tabs The software on the system has 4 different tabs. You can configure specific settings or
get general information while measurements or calibrations are being performed, or
while other procedures are executing database actions.
Action buttons on the software The following buttons are available on the far right-hand side of the screen. The
buttons can be enabled or disabled depending on the operating status or software
function.
Other software buttons
Overview
All information (results, error messages, alarms, warnings, etc.) is
displayed, and measurements can be started.
Workplace
You can perform individual replacement routines, manual QC
measurements and individual databases.
Instrument
All instrument data (e.g. status display) is displayed, and manual
calibrations and various maintenance tasks can be started.
Utilities
You can perform installation and put out of operation operations,
troubleshooting routines, and software updates. Also, you can
configure various settings.
Log on/Log off
Press this button to log on or log off to or from the instrument.
You are required to log on to the system to perform specific functions.
Cancel
Press this button to interrupt an operation in progress, such as a calibration.
Print
Press this button to print results and other data that can be outputted from
the databases.
Legend
Press this button to get more information about the symbols shown on the
screen.
Help
Press this button to open the online help.
The online help contains references to other relevant topics. Use the table of
contents or index to find topics more easily.
First entry
Move up
Move down

Roche cobas b 123 Specifications

General

Brand	Roche
Model	cobas b 123
Category	Medical Equipment
Language	English