Roche Diagnostics
Instructions for Use · Version 13.0 49
cobas b 123 POC system 2 General description
Consumable information
Cuvette
Figure 2-27 Cuvette
The cuvette is connected to the oximeter module.
q
Do not touch the cuvette on the Fluid Pack.
cobas b 123 AutoQC Pack (optional)
Figure 2-28 cobas b 123 AutoQC Pack TRI-LEVEL
AutoQC modules are available for the cobas b 123 POC system to provide regular,
automated quality control.
The advantage of this system is that the QC fluid is withdrawn directly from the
ampoule using the sample needle. The QC measurement procedure for transporting
and handling samples is the same procedure as for sample measurements. Special
sample handling for QC materials is therefore not needed.
A Sample sensor contacts B Cuvette
A
B
To Next Page
Loading...
