Roche Diagnostics
Instructions for Use · Version 13.0 269
cobas b 123 POC system 10 Software functions
Configuring network connection settings
Configuring network connection settings
You can configure various network connection settings, such as how your system
sends patient results to information systems, or how your system connects to other
networks in the Utilities > Configuration > System > Connectivity menu.
u To automatically connect your system to a network using a DHCP server (p. 270)
u To manually connect your system to a network using an IP address (p. 271)
u To manually connect your system to a network using DHCP and DNS servers (p. 271)
u To configure ASTM protocol settings (p. 272)
u To configure POCT1-A protocol settings (p. 274)
u To activate/deactivate cobas
® e-support
(p. 275)
u To select a protocol for performing queries (p. 276)
u To enable remote operator management (p. 276)
u To add or remove parameters from an ASTM or a POCT1-A data transmission (p. 277)
When you press the Close button in the Utilities > Configuration > System
> Connectivity menu, a dialog box appears on the screen.
Figure 10-25 Confirming configuration changes screen
To save your changes, press the OK button.
To discard your changes, press the Discard button.
To return to the previous screen and change additional settings, press the Cancel
button.
To Next Page
Loading...
Need help?
General
