Roche Diagnostics
276 Instructions for Use · Version 13.0
10 Software functions cobas b 123 POC system
Configuring network connection settings
p To select a protocol for performing queries
q
ASTM or POCT1-A protocols have to be activated on the instrument to perform queries
with their respective protocols.
1
Utilities > Configuration > System > Connectivity > Queries
Figure 10-36 Configuring queries screen
2
To perform queries using the ASTM or POCT1-A protocols, make sure that their
respective buttons are highlighted in the Configure queries panel.
3
To disable queries, make sure that the Off button is highlighted.
s
p To enable remote operator management
WARNING
Instrument unavailability when remote operator management is enabled
When remote operator management is enabled and being used, there is a possibility of the
instrument being locked and unavailable.
r Use caution when enabling remote operator management
1
Utilities > Configuration > System > Connectivity > Protocols
Figure 10-37 Remote operator management screen
To Next Page
Loading...
