Roche Diagnostics
272 Instructions for Use · Version 13.0
10 Software functions cobas b 123 POC system
Configuring network connection settings
2
In the IP address panel, press the and buttons on the upper part of the
panel to display DHCP.
The DNS panel becomes active.
Figure 10-30 Configuring network connection screen
3
In the DNS panel, press the and buttons on the upper part of the panel to
display Manual.
4
To enter a DNS IP address, press the button on the DNS 1 field. If you have to
enter a second DNS IP address, press the button on the DNS 2 field. Enter
your IP addresses using the numeric keyboard box that appears on the screen.
Then, press the OK button.
5
To apply your changes, press the Close button.
s
p To configure ASTM protocol settings
1
Utilities > Configuration > System > Connectivity > ASTM
Figure 10-31 ASTM configuration screen
To Next Page
Loading...
