Roche Diagnostics
Instructions for Use · Version 13.0 263
cobas b 123 POC system 10 Software functions
Configuring system settings
p To configure the instrument’s time
1
Utilities > Configuration > System > Date / time
Figure 10-15 Configuring the date and time screen
2
To set the instrument’s time, press the button in the Set time field.
A dialog box appears on the screen.
3
To enter your desired time, press the and buttons on the dialog box.
4
To apply your changes, press the OK button.
5
To set the time format, press the button in the Time format field.
A dialog box appears on the screen.
6
In the dialog box, choose your desired time format from the drop-down list.
7
To apply your changes, press the OK button.
s
p To configure the instrument’s region and time zone
1
Utilities > Configuration > System > Date / time
Figure 10-16 Configuring the date and time screen
To Next Page
Loading...
