12 Rockwell Automation Publication 2094-UM001D-EN-P - May 2010
Preface
Additional Resources
These documents contain additional information concerning related
Rockwell Automation products.
You can view or download publications at
http://www.rockwellautomation.com/literature
. To order paper copies of
technical documentation, contact your local Rockwell Automation distributor or
sales representative.
Resource Description
Kinetix 6000 Power Rail Installation Instructions, publication 2094-IN003
Information on the installation of your Bulletin 2094 power rail.
Kinetix 6000 Shunt Module Installation Instructions, publication 2094-IN004 Information on the installation of your Bulletin 2094 shunt module.
Line Interface Module Installation Instructions, publication 2094-IN005 Information on the installation and troubleshooting of Bulletin 2094
line interface modules (LIM).
Slot-filler Module Installation Instructions, publication 2094-IN006
Information on the installation of Bulletin 2094 slot-filler module.
2094 Mounting Bracket Installation Instructions, publication 2094-IN008 Information on the installation of Bulletin 2094 mounting brackets.
Resistive Brake Module Installation Instructions, publication 2090-IN009 Information on the installation and wiring of Bulletin 2090 Resistive
Brake Modules.
Fiber-optic Cable Installation and Handling Instructions, publication 2090-IN010
Information on proper handling, installing, testing, and
troubleshooting fiber-optic cables.
External Shunt Modules Installation Instructions, publication 2090-IN004
Information on mounting and wiring the Bulletin 1394 shunt modules
with Bulletin 2094 servo drive systems.
1336 Chopper Module Installation Instructions, publication 1336-5.65
Information on installing, configuring, and calculating the data
needed to select a 1336 chopper module and external resistor.
System Design for Control of Electrical Noise Reference Manual,
publication GMC-RM001
Information, examples, and techniques designed to minimize system
failures caused by electrical noise.
EMC Noise Management DVD, publication GMC-SP004
Kinetix Safe-off Feature Safety Reference Manual, publication GMC-RM002
Information on wiring and troubleshooting your Kinetix 6000 servo
drives with the safe-off feature.
Kinetix Motion Control Selection Guide, publication GMC-SG001 Specifications, motor/servo-drive system combinations, and
accessories for Kinetix motion control products.
Rockwell Automation Configuration and Selection Tools
website http://www.rockwellautomation.com/en/e-tools
Motion Analyzer application analysis software for drive/motor sizing.
Online product selection and system configuration tools, including
AutoCAD (DXF) drawings.
Rockwell Automation Product Certification,
website http://www.rockwellautomation.com/products/certification
For declarations of conformity (DoC) currently available from
Rockwell Automation.
SERCOS and Analog Motion Configuration User Manual,
publication MOTION-UM001
Information on configuring and troubleshooting your ControlLogix,
CompactLogix, and SoftLogix SERCOS interface modules.
Motion Coordinate System User Manual, publication MOTION-UM002
Information to create a motion coordinate system with SERCOS or
analog motion modules.
SoftLogix Motion Card Setup and Configuration Manual, publication 1784-UM003
Information on configuring and troubleshooting SoftLogix PCI cards.
ControlFLASH Firmware Upgrade Kit User Manual, publication 1756-QS105
For ControlFLASH information not specific to any drive family.
National Electrical Code, published by the National Fire Protection Association of
Boston, MA
An article on wire sizes and types for grounding electrical
equipment.
Rockwell Automation Industrial Automation Glossary, publication AG-7.1 A glossary of industrial automation terms and abbreviations.
To Next Page
Loading...
