Rockwell Automation Publication 2094-UM001D-EN-P - May 2010 233
Upgrading the Kinetix 6000 Drive Firmware Appendix C
Flash Firmware
Follow these steps to select the drive module to upgrade.
1. Open your ControlFLASH software.
You can access the ControlFLASH utility software by either of these
methods:
• From the Tools menu in RSLogix 5000 software, choose
ControlFLASH.
• Choose Start>Programs>FLASH Programming Tools>
ControlFLASH.
The Welcome to ControlFLASH dialog box opens.
2. Click Next.
The Catalog Number dialog box opens.
To Next Page
Loading...
