256 Rockwell Automation Publication 2094-UM001D-EN-P - May 2010
Appendix E Changing the Default IDN Parameter Values
8. Click Browse.
9. Select the Bulletin 2094 module to read the MSG instruction.
10. Click OK.
Calculate the New IDN Value
Changing the additional bus capacitance value requires calculations. Determine
the sum of all capacitance values for the follower IAM module and each AM
module on the follower IAM power rail.
Refer to Calculate Additional Bus Capacitance on page 247
for more
information.
To Next Page
Loading...
