Rockwell Automation Publication 2094-UM001D-EN-P - May 2010 23
Chapter
2
Planning the Kinetix 6000 Drive System
Installation
Introduction
This chapter describes system installation guidelines used in preparation for
mounting your Kinetix 6000 drive components.
Topic Page
Introduction 23
System Design Guidelines 24
Electrical Noise Reduction 31
ATTENTION: Plan the installation of your system so that you can perform
all cutting, drilling, tapping, and welding with the system removed from
the enclosure. Because the system is of the open type construction, be
careful to keep any metal debris from falling into it. Metal debris or other
foreign matter can become lodged in the circuitry, which can result in
damage to components.
To Next Page
Loading...
