Rockwell Automation Allen-Bradley 2094-BM01-S - Save the Add Bus Cap Parameter to Non-Volatile Memory

Rockwell Automation Publication 2094-UM001D-EN-P - May 2010 251
DC Common Bus Applications Appendix D
The command dialog box for parameter x599 - Add Bus Cap opens.
6. Click the Value Edit tab and enter the Add Bus Cap Value (μF).
7. Click OK.
The RBM module delay time is changed, but not saved in non-volatile
memory.
Save the Add Bus Cap Parameter to Non-volatile Memory
Follow these steps to save the Add Bus Cap parameter to non-volatile memory.
1. From the Actions menu, choose Non-volatile Memory.
This message dialog box opens.
2. Click Save.
The changes are saved to non-volatile memory and this cautionary message
dialog box opens.
3. Click Yes.