General Instrument Setup
R&S
®
ESW
311User Manual 1177.6298.02 ─ 08
For step-by-step instructions see Chapter 13.2.2, "How to Configure the Colors for Dis-
play and Printing", on page 314.
Theme......................................................................................................................... 311
Screen Colors..............................................................................................................311
Print Colors................................................................................................................. 312
Showing Print Colors on Display.................................................................................312
Modifying User-Defined Color Assignments............................................................... 312
└ Selecting the Object......................................................................................312
└ Predefined Colors......................................................................................... 313
└ Preview......................................................................................................... 313
Defining User-specific Colors......................................................................................313
Restoring the User Settings to Default Colors............................................................ 313
Theme
The theme defines the colors and style used to display softkeys and other screen
objects.
The default theme is "BlueOcean".
Remote command:
DISPlay:THEMe:SELect on page 646
Screen Colors
Two different color sets are provided by the <instrument>, a third user-defined set can
be configured.
The default color schemes provide optimum visibility of all screen objects when regard-
ing the screen from above or below. Default setting is "Default Colors 1".
If "User Defined Colors" is selected, a user-defined color set can be defined (see
"Defining User-specific Colors" on page 313).
Remote command:
DISPlay:CMAP<it>:DEFault<ci> on page 644
Display Settings