Remote Commands in the Receiver Application
R&S
®
ESW
534User Manual 1177.6298.02 ─ 08
If the time stamp is active, some commands do not address frames as numbers, but as
(relative) time values:
●
CALCulate<n>:DELTamarker<m>:SPECtrogram:FRAMe on page 556
●
CALCulate<n>:MARKer<m>:SPECtrogram:FRAMe on page 552
●
CALCulate<n>:SPECtrogram:FRAMe:SELect on page 531
Suffix:
<n>
.
1..n
Window
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example: //Activates the time stamp
CALC:SGR:TST ON
Manual operation: See "Time Stamp" on page 217
CALCulate<n>:SGRam[:STATe] <State>
CALCulate<n>:SPECtrogram[:STATe] <State>
This command turns the spectrogram on and off.
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example:
CALC:SGR ON
Activates the Spectrogram result display.
Manual operation: See "State" on page 216
Color Map Configuration
DISPlay[:WINDow<n>]:SGRam:COLor:DEFault................................................................535
DISPlay[:WINDow<n>]:SPECtrogram:COLor:DEFault........................................................535
DISPlay[:WINDow<n>]:SGRam:COLor:LOWer..................................................................535
DISPlay[:WINDow<n>]:SPECtrogram:COLor:LOWer.........................................................535
DISPlay[:WINDow<n>]:SGRam:COLor:SHAPe................................................................. 535
DISPlay[:WINDow<n>]:SPECtrogram:COLor:SHAPe.........................................................535
DISPlay[:WINDow<n>]:SGRam:COLor:UPPer.................................................................. 535
DISPlay[:WINDow<n>]:SPECtrogram:COLor:UPPer..........................................................535
DISPlay[:WINDow<n>]:SGRam:COLor[:STYLe]................................................................536
DISPlay[:WINDow<n>]:SPECtrogram:COLor[:STYLe]........................................................536
Analysis