Rohde & Schwarz SMAB-B92 - Page 258

Improving Level Performance
R&S
®
SMA100B
256User Manual 1178.3834.02 ─ 05
Format - Power Analysis
Selects the file format.
Several bitmap graphic formats are offered. In addition, format *.csv is available
which stores the measurement values as ASCII data.
You can refine the csv settings further, see "CSV Options" on page 257.
Remote command:
:SENSe[:POWer]:SWEep:HCOPy:DEVice:LANGuage on page 471
Automatic Naming Settings
Access:
1. Select "Clk Syn/Power Sens" > "NRP Power Analysis".
2. In the diagram window, open the context-sensitive menu.
3. In the menu, select "Save... (Power Analysis)".
4. Select "Options".
5. In the "Save NRP-Z Analysis Options" dialog, enable "Automatic Naming."
Path
Sets the directory for saving the files.
Remote command:
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO:DIRectory on page 474
Using Power Sensors