Rohde & Schwarz SMAB-B92 - Page 623

Remote Control Commands
R&S
®
SMA100B
621User Manual 1178.3834.02 ─ 05
Usage: Query only
Manual operation: See " List Mode Data " on page 185
[:SOURce<hw>]:LIST:DELete <Filename>
Deletes the specified list.
Setting parameters:
<Filename> string
Filename or complete file path; file extension is optional.
Example: See [:SOURce<hw>]:LIST:DELete:ALL on page 621.
Usage: Setting only
Manual operation: See " List Mode Data " on page 185
[:SOURce<hw>]:LIST:DELete:ALL
Deletes all lists in the set directory.
This command can only be executed, if:
●
No list file is selected.
●
List mode is disabled.
Example:
SOUR1:LIST:CAT?
// list,my_list
SOUR1:LIST:DEL "/var/user/list1"
SOUR1:LIST:CAT?
// my_list
SOUR1:FREQ:MODE?
// LIST
SOUR1:LIST:SEL?
// /var/user/my_list.lsw
//deactivate list mode
SOUR1:FREQ:MODE CW
SOUR1:LIST:DELete:ALL
SOUR1:LIST:CAT?
// -
// all list files are deleted
Usage:
Event
Manual operation: See " List Mode Data " on page 185
[:SOURce<hw>]:LIST:FREE?
Queries the amount of free memory (in bytes) for list mode lists.
SOURce Subsystem