DescriptionFunction
Press FUNC and use the mnemonic buttons to
access specific memory functions.
• Undo — The Undo button allows you to
take back, or undo, the last memory recall.
This returns the switcher to the state it was
in prior to the last memory recall. The Undo
button lights up after each memory recall,
indicating that the action can be undone. If
you perform 10 or more button presses
after the memory recall, the Undo button
goes out, and the memory can no longer
be recalled.
• Attrib — The Attributes button allows you
to view the ME Memory Attributes menu,
or override the attributes stored with the
memory.
• Keys Only — The Keys Only button allows
you to recall a memory on a panel row that
does not include the Program and Preset
bus selection. Only the keyer selections are
recalled.
• Eff Diss — The Effects Dissolve button
allows you to have the keys from one
memory slew into the keys from the one
you are recalling.
Memory
Functions
DescriptionFunction
Press FUNC > Rates and use the mnemonic
buttons to select the rate you want to change.
• Fade Rate — The Fade to Black Rate
button allows you to set the rate at which
the switcher transitions to black.
1. Press Fade Rate and use the
mnemonic buttons to enter the new
rate.
2. Press BANK/ENTER.
The display to the right of the memory
module stated New FTB rate: with
the new FTB rate.
• Eff Rate — The Effects Dissolve Rate
button allows you to set the rate that an
effects dissolve slews from one memory to
another.
1. Press Eff Rate and use the mnemonic
buttons to select the ME(s) that you
want to set the rate for.
2. Press BANK/ENTER.
3. Use the mnemonic buttons to enter
the new rate and press
BANK/ENTER.
The display to the right of the memory
module stated New EFF rate: with
the new FTB rate.
• ME Rate — The ME Rate button allows
you to set the rate for an ME background
transition.
1. Press ME Rate and use the
mnemonic buttons to select the ME(s)
that you want to set the rate for.
2. Press BANK/ENTER.
3. Use the mnemonic buttons to enter
the new rate new rate and press
BANK/ENTER.
The display to the right of the memory
module stated New rate: with the new
FTB rate.
• Key Rate — The Key Rate button allows
you to set the rate for an keyer transition.
1. Press Key Rate and use the
mnemonic buttons to select the ME(s)
that you want to set the rate for.
2. Press BANK/ENTER.
3. Use the mnemonic buttons to select
the key(s) that you want to set the rate
for.
4. Press BANK/ENTER.
5. Use the mnemonic buttons to enter
the new rate new rate and press
BANK/ENTER.
The display to the right of the memory
module stated New Key rate: with
the new FTB rate.
Rates
22 • Carbonite Black Control Panel Overview — Acuity Operation Manual (v9.2)
To Next Page
Loading...
Need help?
General
