Date Code 20010719 701 Motor Protection Relay
SEL-701PC Software
Installation
3.3
Installation
To install the SEL-701PC software, perform the following steps:
1. With your PC turned on and all applications closed, load the
SEL-701PC software CD-ROM into your CD-ROM drive.
2. The setup software should run automatically. If Setup does not start,
use the Microsoft Windows Run function to start the program
Setup.exe from the CD-ROM.
3. Follow the steps as they appear on screen. The setup program also
gives you the opportunity to install an online copy of the SEL-701
Relay Instruction Manual and Adobe Acrobat Reader software
necessary to view the PDF format instruction manual.
To Next Page
Loading...
