701 Motor Protection Relay Date Code 20010719
SEL-2020/2030 & SEL-701PC Compatibility Features
Fast Binary Message Definitions
D.4
A5C1 Fast Meter Configuration Block
In response to the A5C1 request, the SEL-701 Relay sends the block
shown in Tabl e D.4 .
Table D.4 A5C 1 Fast Meter Co nfiguration Blo ck
Table D.4 A5C1 Fast Meter Configuration Block
Data Description
A5C1 Fast Meter command
xx Response Length in Bytes (specific value of xx
based on relay model, as shown below)
0x6C Base Relay
0x94 Relay with RTDs
0xD0 Relay with voltages
0xF8 Relay with RTDs, voltages
01 One status flag byte
00 Scale factors in Fast Meter message
00 No scale factors
xx # of analog input channels (specific value of xx
based on relay model, as shown below)
09 Base Relay
0D Relay with RTDs
13 Relay with voltages
17 Relay with RTDs, voltages
01 # of samples per channel
0D # of digital banks
0D # of calculation blocks
0004 Analog channel offset
xxxx Time stamp offset (specific value of xxxx based
on relay model, as shown below)
0028 Base Relay
0030 Relay with RTDs
0050 Relay with voltages
0058 Relay with RTDs, voltages
(Continued)
To Next Page
