701 Motor Protection Relay Date Code 20010719
List of Tables
viii
Table 4.23 RTD Location Settings ............................................................... 4.31
Table 4.24 RTD Type Settings...................................................................... 4.32
Table 4.25 RTD Alarm and Trip Temperature Settings................................ 4.33
Table 4.26 RTD Resistance versus Temperature .......................................... 4.36
Table 4.27 Under- and Overvoltage Settings, Phase-to-Phase Potentials .... 4.37
Table 4.28 Under- and Overvoltage Settings, Phase-to-Neutral Potentials.. 4.38
Table 4.29 Reactive Power Element Settings............................................... 4.38
Table 4.30 Underpower Element Settings .................................................... 4.39
Table 4.31 Power Factor Element Settings................................................... 4.40
Table 4.32 Frequency Element Settings ....................................................... 4.41
Table 4.33 Analog Output Settings .............................................................. 4.42
Table 4.34 Front-Panel Configuration Settings ............................................ 4.43
Table 4.35 Display Message Settings........................................................... 4.44
Table 4.36 Output Contact Fail-Safe,
Trip Duration, and Starting Lockout Settings ....................... 4.45
Table 4.37 Antibackspin Setting................................................................... 4.45
Table 4.38 Factory Logic Settings................................................................ 4.46
Table 4.39 SET P Serial Port Settings, Protocol = ASCII............................ 4.50
Table 4.40 SET P Rear-Panel Serial Port Settings, Protocol = MOD .......... 4.51
Table 4.41 SET R SER Trigger Settings ...................................................... 4.52
Table 4.42 Default SER Trigger Setting Relay Word Bits Definitions ........ 4.53
Table 4.43 SET R SER Enable Alias Settings.............................................. 4.55
Table 4.44 SET R SER Alias Settings.......................................................... 4.56
Section 5: Front-Panel Operation
Table 5.1 Front-Panel Automatic Messages................................................. 5.3
Table 5.2 Front-Panel Pushbutton Functions................................................ 5.5
Section 6: ASCII Serial Port Operation
Table 6.1 Pin Functions and Definitions
for SEL-701 Relay EIA-232 Serial Ports................................ 6.4
Table 6.2 SEL-701 Relay Serial Communication Default Settings ............. 6.5
Table 6.3 Serial Port Control Characters...................................................... 6.6
Table 6.4 SEL-701 Serial Port Command Summary.................................... 6.8
Table 6.5 SEL-701 Relay Control Subcommands...................................... 6.12
Table 6.6 Event Commands........................................................................ 6.13
Table 6.7 EVE Command Examples.......................................................... 6.13
Table 6.8 LDP Command Options ............................................................. 6.14
Table 6.9 MSR General Command Format................................................ 6.19
Table 6.10 PULSE Command Format.......................................................... 6.20
Table 6.11 SER Command Options.............................................................. 6.22
Table 6.12 Serial Port SET Commands........................................................ 6.22
Table 6.13 SET Command Editing Keystrokes............................................ 6.23
Table 6.14 SET Command Format............................................................... 6.23
Table 6.15 SHOW Command Options ......................................................... 6.24
To Next Page
Loading...
